NP-reducing Biopellets can be placed in canister filters or fluidized reactors. The latter configuration may yield better results, and prevents detritus buildup. A proper starting dosage is 0.5-1 liter of pellets per 500 liters of system volume (12,5-25 fl. oz. for every 100 USG). After about 2-4 weeks, nitrate and phosphate levels should start decreasing. For some aquaria experiencing heavy feeding, higher dosages are appropriate. Examples are aquaria which house large quantities of azooxanthellate corals, sponges, tunicates or large schools of Anthias fish. Dosages may be increased indefinitely, provided the aquarium water is sufficiently aerated.
 

NP-reducing BioPellets are consumed by bacteria, which is why new pellets need to be added every 3-6 months to compensate for digested substrate. This can be seen during inspection of the filter. These figures however depend on aquarium conditions and are strongly influenced by feeding regimes and livestock. Taking regular measurements of both nitrate and phosphate levels in the aquarium is recommended, after which dosages may be increased or decreased.

We also suggest placing the outlet of the pellet filter in front of a protein skimmer, to limit the amount of bacteria entering the system. This has the additional benefit of increased gas exchange (CO₂-removal and O₂-addition). The pellets should never be used without sufficient aeration, as this may lead to low oxygen and pH levels, especially during night time. Proper aeration can be established with air pumps and protein skimmers.

When heavy feeding is required, it is recommended to combine the pellets with standard phosphate adsorbants. The reason for this is that most aquarium feeds contain higher levels of phosphate than is consumed by bacteria, fish and invertebrates, when compared to nitrogen. Some phosphate adsorbants however deplete alkalinity and may reduce pH. Using phosphate adsorbent media based on iron hydroxide does not have this disadvantage.

Important:

- Maintain sufficient water flow through the BioPellets, to prevent production of hydrogen sulphide gas.

- The use of ozone and UV will negatively affect bacterial recruitment of the BioPellets and increase the maturation time of the filter. Adding bacterial cultures may alleviate this problem and shorten filter maturation time in general. 
 

- When nitrate and phosphate are already very low before applying BioPellets, a decrease in these levels may not be detectable with standard aquarium testkits.

Disclaimer:

Reef Interests, NPBioPellets.com and Coral Publications cannot be held responsible for any loss of livestock or damages to personal property resulting from the incorrect use of NP-reducing BioPellets